[Latex2rtf-users] Bug

[Patrick Dupre]

Hello,

I am use latex2rtf 2.3.13 r1248 (released Mar 22 2017)
on a fedora 24

The code fails when I try to generate a rtf file

\documentclass[10pt,american]{revtex4-1}

\usepackage[T1]{fontenc}
\usepackage[latin9]{inputenc}
\usepackage[a4paper]{geometry}
\usepackage{babel}
\pagestyle{plain}


\begin{document}


\section{Introduction}

In a

\begin{equation}
{\rm d}\bm{\alpha}_{m_{u}m_{l}}\left(\omega,\delta,r\right)=\frac{\frac{{\rm d}}{{\rm d}z}\left[{\rm i}\int\left[\omega\,{\rm d}\bm{P}_{m_{u}m_{l}}^{*}\left(\omega,\delta,r,z\right)\right]\otimes\bm{E}\left(\omega,r,z\right)\,{\rm d}V\right]}{c\epsilon_{0}\int\int\bm{E}^{*}\left(\omega,r,z\right)\otimes\bm{E}\left(\omega,r,z\right)\,{\rm d}S\,{\rm d}\omega},%\label{eq:alpha_cmpx}
\end{equation}


\subsection{Liouville Equation}

When


\end{document}

===========================================================================
Patrick DUPRÉ | | email: ***@gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: [phone]
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================

[Wilfried Hennings]

Hello,
the error messages

Document format <revtex4-1> unknown, using article format
Package/option 'american' unknown.
Unknown command '\bm'

say it all:
These commands aren't yet supported.
This is not a bug but a known limitation of the program.

If you use latex2rtf with the option -M12, conversion will succeed,
because the equation with the unsupported command will be processed by
LaTeX and converted to a bitmap.

Regards
Wilfried

At 06.04.2017 14:28 Patrick Dupre wrote:
> Hello,
>
> I am use latex2rtf 2.3.13 r1248 (released Mar 22 2017)
> on a fedora 24
>
> The code fails when I try to generate a rtf file
>
> \documentclass[10pt,american]{revtex4-1}
>
> \usepackage[T1]{fontenc}
> \usepackage[latin9]{inputenc}
> \usepackage[a4paper]{geometry}
> \usepackage{babel}
> \pagestyle{plain}
>
>
> \begin{document}
>
>
> \section{Introduction}
>
> In a
>
> \begin{equation}
> {\rm d}\bm{\alpha}_{m_{u}m_{l}}\left(\omega,\delta,r\right)=\frac{\frac{{\rm d}}{{\rm d}z}\left[{\rm i}\int\left[\omega\,{\rm d}\bm{P}_{m_{u}m_{l}}^{*}\left(\omega,\delta,r,z\right)\right]\otimes\bm{E}\left(\omega,r,z\right)\,{\rm d}V\right]}{c\epsilon_{0}\int\int\bm{E}^{*}\left(\omega,r,z\right)\otimes\bm{E}\left(\omega,r,z\right)\,{\rm d}S\,{\rm d}\omega},%\label{eq:alpha_cmpx}
> \end{equation}
>
>
> \subsection{Liouville Equation}
>
> When
>
>
> \end{document}
>
> ===========================================================================
> Patrick DUPRÉ | | email: ***@gmx.com
> Laboratoire de Physico-Chimie de l'Atmosphère | |
> Université du Littoral-Côte d'Opale | |
> Tel. (33)-(0)3 28 23 76 12 | | Fax: [phone]
> 189A, avenue Maurice Schumann | | 59140 Dunkerque, France
> ===========================================================================
> _______________________________________________
> Latex2rtf-users mailing list
> Latex2rtf-***@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>

[Patrick Dupre]

OK,

but then it should not fails with M0
If I do not need to the conversion of the equations
It still fails with -M0


===========================================================================
Patrick DUPRÉ | | email: ***@gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: [phone]
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================


> Sent: Thursday, April 06, 2017 at 7:08 PM
> From: "Wilfried Hennings" <***@gmx.de>
> To: "Patrick Dupre" <***@gmx.com>, latex2rtf <latex2rtf-***@lists.sourceforge.net>
> Subject: Re: [Latex2rtf-users] Bug
>
> Hello,
> the error messages
>
> Document format <revtex4-1> unknown, using article format
> Package/option 'american' unknown.
> Unknown command '\bm'
>
> say it all:
> These commands aren't yet supported.
> This is not a bug but a known limitation of the program.
>
> If you use latex2rtf with the option -M12, conversion will succeed,
> because the equation with the unsupported command will be processed by
> LaTeX and converted to a bitmap.
>
> Regards
> Wilfried
>
> At 06.04.2017 14:28 Patrick Dupre wrote:
> > Hello,
> >
> > I am use latex2rtf 2.3.13 r1248 (released Mar 22 2017)
> > on a fedora 24
> >
> > The code fails when I try to generate a rtf file
> >
> > \documentclass[10pt,american]{revtex4-1}
> >
> > \usepackage[T1]{fontenc}
> > \usepackage[latin9]{inputenc}
> > \usepackage[a4paper]{geometry}
> > \usepackage{babel}
> > \pagestyle{plain}
> >
> >
> > \begin{document}
> >
> >
> > \section{Introduction}
> >
> > In a
> >
> > \begin{equation}
> > {\rm d}\bm{\alpha}_{m_{u}m_{l}}\left(\omega,\delta,r\right)=\frac{\frac{{\rm d}}{{\rm d}z}\left[{\rm i}\int\left[\omega\,{\rm d}\bm{P}_{m_{u}m_{l}}^{*}\left(\omega,\delta,r,z\right)\right]\otimes\bm{E}\left(\omega,r,z\right)\,{\rm d}V\right]}{c\epsilon_{0}\int\int\bm{E}^{*}\left(\omega,r,z\right)\otimes\bm{E}\left(\omega,r,z\right)\,{\rm d}S\,{\rm d}\omega},%\label{eq:alpha_cmpx}
> > \end{equation}
> >
> >
> > \subsection{Liouville Equation}
> >
> > When
> >
> >
> > \end{document}
> >
> > ===========================================================================
> > Patrick DUPRÉ | | email: ***@gmx.com
> > Laboratoire de Physico-Chimie de l'Atmosphère | |
> > Université du Littoral-Côte d'Opale | |
> > Tel. (33)-(0)3 28 23 76 12 | | Fax: [phone]
> > 189A, avenue Maurice Schumann | | 59140 Dunkerque, France
> > ===========================================================================
> > _______________________________________________
> > Latex2rtf-users mailing list
> > Latex2rtf-***@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
> >
>
>